Wacom DTZ-2100D - 2005, User Manual

Page: 6 / 99

4
■
Be sure to fix the product to the stand
with screws prior to lifting.
If the stand is not attached prior to
lifting, it may fall resulting in injury and/or
damage to Cintiq, the floor or furniture.
It may also unexpectedly rotate, causing
it to be dropped. If the product must be
lifted without being fixed to the stand, be
sure to remove the body from the stand
prior to lifting.
■ Do not operate the incline
adjustment levers when the
product has been removed from
the stand and there is no weight on the
stand, or when the stand is otherwise
empty.
The stand is spring-loaded and may
close suddenly, resulting in injury or
damage to the stand.
■
Be careful not to get your fingers
caught in the closing mechanism
when closing the stand.
■ Do not place the product face-up
when the cable is sticking out from
the shaft bearing.
Doing so puts excessive stress on the
base of the cable and may cause product
failure. Place the main body that has
been removed back in the stand or, if
you want to use the product face-up,
adjust the cable so that it protrudes from
the upper part of the body instead of the
shaft bearing.
■ Do not place the product
on unstable surfaces.
Do not place the product where it is
likely to totter, lean or be exposed
to strong vibrations. Doing so may
lead to the product falling, resulting
in injury and/or product failure.
■ Do not place heavy objects
on the product.
Do not put excessive weight, or place
heavy objects on the product. These
actions may cause product failure.
■
Do not place the product in
either very hot or very cold places.
Do not place the product in very hot
(35 degrees centigrade or more) or
very cold (5 degrees centigrade or
less) locations. Also, avoid placing
it in locations with severe temperature
fluctuations as this may adversely affect
the product and cause product failure.
■
Do not disassemble the
product.
Do not disassemble or modify
the product, as these actions
may lead to fire, excessive
generation of heat, electrical
shock or injury. The guarantee
on the product will become
null and void if the product is ever
disassembled.
Caution
Cin21UX_EN .indd 4 09.7.29 9:50:18 AM