Wacom DTZ-2100D - 2005, User Manual

Page: 27 / 99

25
NO. Setting Item Description
1 Tablet The currently registered tablet is displayed. When selected, a blue
frame will surround the tablet and it may be modified.
2 Tool The function icon and the currently registered pen are displayed.
When either is selected, a blue frame will surround the selected
item and it may be modified.
3 Application The currently registered application is displayed. If it is selected, a
blue frame will surround it and it may be modified.
4 Options Set side-switch expert*.
5 About Displays information regarding the tablet and the tablet driver. For
an analysis of the tablet, click on the Diagnostics button.
6 Default Click on this button and all settings return to their default settings (IE, all
settings return to their state at the time of purchase of the product).
7 Help You can see the Help file, if you click this button.
*As a default setting, if you hold the pen just above the surface of the tablet and push the Side
Switch, functions that have been set up become functional. In Side Switch Expert Mode, the Side
Switch function settings (for example, right button-click and middle button-click) become functional
when the pen tip is clicked while the Side Switch is pushed. Side Switch Expert Mode is effective
when detailed positioning is required through operation of the right and middle buttons. Clicking on
the Option button at the bottom of the Control Panel displays and establishes the Optional Settings
dialog box.
Synchronizing the Positions of the Pen Tip and Pointer
Make the necessary adjustments so that when the pen nib is brought near the LCD screen, the
pointer displays properly in the area where the pen nib is placed (parallactic adjusting).
* When using an analog RGB input type of LCD pen tablet, please refer to “Protrusion of the
Screen from the LCD Panel and the Blurring of Characters” on page 13 and make any necessary
adjustments to the screen.
* When using multiple tablets, please
refer to the Help file(
→
P.24).
1 Select Pen from the Input Device list
and then click on the Calibration tab
in the Control Panel.
2
Click on Calibrate... and the screen
used for making adjustments will
appear.
3 Click in the middle of the cross mark
in the upper left-hand corner of the
screen while sitting in your normal
seating position with the pen nib and
the cross mark will move to the bottom
right-hand side of the screen.
4
Click again in the middle of the cross
mark that is now in the bottom right-
hand corner of the screen while sitting
in your normal seating position and
the cross mark will disappear. The
process of synchronizing positions is
now complete.
Click on the OK button in the lower part of
the screen to close the screen.
Cin21UX_EN .indd 25 09.7.29 9:50:53 AM