Wacker Neuson Trowel CT 24-4A, Operator'S Manual

Page: 43 / 68

CT 24-4A Troubleshooting
wc_tx003234gb.fm
43
6 Troubleshooting
Problem / Symptom Reason / Remedy
Trowel does not develop full
speed.
„
Remove deposits built up in engine cylinder and
engine head.
„
Engine speed too low. Adjust speed.
„
Clean or replace air filter.
„
Clean debris from moving parts and trowel blades.
„
In cold weather, warm engine in idle 3 or 4 minutes.
„
Check throttle lever and cable for proper operation.
Engine runs;
poor trowel operation.
„
Check drive belt for wear or damage.
„
Check clutch for wear or damage.
„
Clean debris from moving parts and trowel arms.
Engine does not start or runs
erratically.
„
Check fuel level. Open fuel valve.
„
Clean air filter.
„
Check/replace spark plug.
„
Check in-line fuel filter.
„
Check engine oil level.
„
Check engine stop button.
„
Check that throttle is in idle position when starting
machine.
Trowel handle tends to rotate
when idling.
„
Check engine idle speed. (It may be too high).
„
Belt alignment may be off.