Wacker Neuson Trowel CT 24-4A, Operator'S Manual

Page: 33 / 68

wc_tx003233gb.fm
33
CT 24-4A Maintenance
5 Maintenance
5.1 Maintaining the Emission Control System
Normal maintenance, replacement or repair of emission control devices and
systems may be performed by any repair establishment or individual; however,
warranty repairs must be performed by a dealer/service center authorized by the
engine manufacturer. See the supplied engine owner’s manual for the applicable
emission warranty information.
5.2 Periodic Maintenance Schedule
The table below lists basic machine and engine maintenance. Tasks designated
with check marks may be performed by the operator. Tasks designated with square
bullet points require special training and equipment.
Refer to the engine owner’s manual for additional information.
Daily
After
first
20 hrs.
Every
50
hrs.
Every
100
hrs.
Every
300
hrs.
Check fuel level.
3
Check engine oil level.
3
Inspect fuel lines.
3
Inspect air filter. Replace as needed.
„
Check external hardware.
3
Clean trowel after each use to
remove concrete splatter.
3
Grease blade arms as needed.
„
Clean air cleaner elements.
„
Change engine oil.
„ „
Check drive belt.
„
Clean sediment cup.
„
Check and clean spark plug.
„
Check and adjust valve clearances.
„