wc_si000741gb.fm
12
Safety Information
CT 24-4A
Safety
devices,
controls, and
attachments
Only operate the machine when:
All safety devices and guards are in place and in working order.
All controls operate correctly.
The machine is set up correctly according to the instructions in the Operator’s
Manual.
The machine is clean.
The machine’s labels are legible.
To ensure safe operation of the machine:
Do not operate the machine if any safety devices or guards are missing or
inoperative.
Do not modify or defeat the safety devices.
Only use accessories or attachments that are approved by Wacker Neuson.
Safe
operating
practices
When operating this machine:
Remain aware of the machine’s moving parts. Keep hands, feet, and loose
clothing away from the machine’s moving parts.
When operating this machine:
Do not operate a machine in need of repair.
Do not operate the machine with the beltguard missing. Exposed drive belt and
pulleys create potentially dangerous hazards that can cause serious injuries.
Do not use the trowel around pop-ups in the concrete that are lower than the
lowest ring on the ring guard.
Do not lift the machine solely by the handle. The component may fail, causing
the machine to fall, possibly injuring bystanders.
Test the function of the engine control module before operating the trowel. Do
not operate the trowel if the engine control module is not functioning properly.
Personal
Protective
Equipment
(PPE)
Wear the following Personal Protective Equipment (PPE) while operating this
machine:
Close-fitting work clothes that do not hinder movement
Safety glasses with side shields
Hearing protection
Safety-toed footwear
After Use
Stop the engine when the machine is not being operated.
Close the fuel valve on engines equipped with one when the machine is not
being operated.
Ensure that the machine will not tip over, roll, slide, or fall when not being
operated.
Store the machine properly when it is not being used. The machine should be
stored in a clean, dry location out of the reach of children.
Summary of Contents for Trowel CT 24-4A
Page 6: ......
Page 16: ...Labels CT 24 4A 16 wc_si000742gb fm 2 Labels 2 1 Label Locations...
Page 65: ...33 Notes 34 Notes...
Page 68: ......