MIO-R290GM2011 Rev E
G&B Specialties Inc. 535 West 3
rd
Street, Berwick, PA, USA Tel: (570) 752-5901 Fax: (570) 752-6397
US Field Service: 570-441-6988; CAN Field Service 570-854-0482; www.rafna.com
-51-
3.0
F
RONT
&
R
EAR
M
OUNTING KIT
I
NSTALLATION
S
AFETY
P
RECAUTIONS
If any installation problems are encountered, please call G&B Specialties for technical
assistance before continuing with the installation process.
Failure to heed to any of the following warnings could result in severe bodily
injury and/or equipment damage.
Read and understand this manual completely before attempting installation of
the equipment.
Installation instructions provided below only address the RAFNA railgear
equipment. Applicable railway company procedures and policies must be
adhered to.
Before performing any work under the vehicle or railgear, ensure the engine is
turned off and the parking brake is set.
Do not start the vehicle with the power steering hoses disconnected.
Reconnect all hoses and secure the power steering cooler if the vehicle is
started.
Ensure all removed components are given to the vehicle owner after the
installation of the railgear. These components must be re-installed if the
railgear is removed from the vehicle.
Always disconnect the vehicle’s battery when welding on the vehicle or railgear
to protect the vehicle’s electrical system.
Railway Company rules governing rail travel must be observed at all times.
Never operate the vehicle if the Gross Vehicle Weight Rating (GVWR), Gross
Axle Weight Rating Front or Rear (GAWR), or the wheel or tire load ratings are
exceeded.
!
