MIO-R290GM2011 Rev E
G&B Specialties Inc. 535 West 3
rd
Street, Berwick, PA, USA Tel: (570) 752-5901 Fax: (570) 752-6397
US Field Service: 570-441-6988; CAN Field Service 570-854-0482; www.rafna.com
-33-
8.
Due to the modified wheel track on the railgear equipped vehicle, both front and rear tire
and wheel clearances must be checked. With the wheels and tires turning installed on the
vehicle, ensure that the wheels, tires, and/or balance weights do not contact the vehicle
suspension or steering components, the brake lines, the ABS lines and/or any other
component/obstruction throughout the entire range of motion of the steering and
suspension.
9.
Ensure that any vehicle modifications are done in accordance with the vehicle
manufacturer's or their representative's approval.
10.
The speedometer will need to be recalibrated due to the change in tire size.
Bigger tires will cause your speedometer to register a speed that is slower than
your actual speed.
11.
The vehicle will need to have a wheel alignment done. After the wheel kit is installed and
the railgear is hung.
12.
The tire pressure sensors (if equipped) will need to be calibrated to learn new position.
For this wheel kit, follow the OEM recommendations as outlined in the vehicles owner
manual.
