MIO-R290GM2011 Rev E
G&B Specialties Inc. 535 West 3
rd
Street, Berwick, PA, USA Tel: (570) 752-5901 Fax: (570) 752-6397
US Field Service: 570-441-6988; CAN Field Service 570-854-0482; www.rafna.com
-159-
33.
Lower both front and rear railgear to rail position and ensure the lock cam converters
previously installed prevent the lock pins from engaging the lock cams.
34.
Locate and store the hand pump handle and the locking cable holding collar in a secure
location in the vehicle cab.
*Ensure that the thermal overload wires are properly spliced/connected as shown*
*It is recommended that a 200 amp fuse be installed to isolate the hydraulic pump from
the vehicle electrical system as shown*
