MIO-R290GM2011 Rev E
G&B Specialties Inc. 535 West 3
rd
Street, Berwick, PA, USA Tel: (570) 752-5901 Fax: (570) 752-6397
US Field Service: 570-441-6988; CAN Field Service 570-854-0482; www.rafna.com
-108-
R-290
R
AILGEAR
–
P
RE
-D
ELIVERY
C
HECK
L
IST
This checklist is provided to help ensure that the railgear is properly installed and adjusted
prior to the vehicle being put in service. To register this railgear installation, please fax a
completed copy of both this form and the railgear alignment sheet to G&B Specialties, Inc.
Service Manager at 570-802-0491.
Railgear Model:
Vehicle Year:
Railgear Serial No.:
Frt
Vehicle Make:
Rr
Vehicle Model:
Date Received:
Vehicle VIN/Unit #:
Date Completed:
End User:
Railgear
Checks
1.
Rail wheel bearing end play adjusted (see manuals for procedure)
2.
Front & rear railgear over-center adjusted (see manuals for procedure)
3.
Rail sweeps adjusted (see manuals for procedure)
4.
Rail wheel load adjusted (see manuals & fill out values on alignment sheet)
5.
Rail wheel alignment performed (attach copy of alignment sheet)
6.
Front & rear railgear lock systems engage/disengage smoothly
7.
Lock cam converters installed on In-Cab Controls models only
8.
Safety lock pins installed on Full-In-Cab Controls models only
9.
Railgear components clear all vehicle component thru full range of motion
10.
Railgear operating decals installed next to controls
11.
Railgear pump decal installed next to dash switch (standard control models)
12.
Railgear manifold decals installed on manual over-rides
13.
Steering wheel lock decal installed on dash
14.
Steering wheel lock installed
15.
All railgear joints lubricated (see manuals for lubrication points)
Wheel
Kit
Checks
16.
Vehicle turning stop blocks installed
17.
Wheel and spacer lug nuts tightened (see manuals for specifications)
18.
Wheel lug nut torque value decals installed on wheels
19.
Wheels & tires clear all vehicle components thru full range of motion
Hydraulic
Checks
20.
Hydraulic lock valves installed with correct orientation (ICC & FCC only)
21.
Air bled from railgear hydraulic system
22.
Pump tank filled as required with hydraulic fluid
23.
Railgear pump relief valve adjusted (see manuals for procedure)
24.
All hydraulic hoses clear of hot / sharp edges and tied back
25. No
hydraulic oil leaks – at pump, manifold, hoses, fittings, and cylinders
