![background image](http://html1.mh-extra.com/html/wabrotech/wt20i/wt20i_operating-instructions-manual_3098526036.webp)
6. START-UP
WABRO sc ul. Arki Boÿek 2A, 41-910 Bytom
NIP: PL6263032331 | Regon: 381911373
Wabrotech.pl
10
3. Place the suction hose with the discharge
pipe in a container with water.
5. Connect the generator to an earth ground
7. Tighten the pressure regulator clockwise
until the desired value is reached.
4. The service valve should be placed
vertically downwards in the overflow
position first.
2.
When starting the chiller for the first time,
the potentiometer is set to low pressure.
Start with this slowly increasing until you
reach the value you need.
and submerge them completely.
6. Turn on the device.
10. Turn the power switch ON.
1. First make sure the ON/OFF switch is in
the OFF position.
9. Transfer the 2 tubes to the paint container
cable socket.
8. Turn off the power switch.
Machine Translated by Google