13. TROUBLESHOOTING
WABRO sc ul. Arki Boÿek 2A, 41-910 Bytom
NIP: PL6263032331 | Regon: 381911373
Wabrotech.pl
18
Solution
Electric socket not provided
Unplug the generator from the socket. If frozen,
DO NOT attempt to start the generator until it
is completely thawed as this may damage the
engine, control board and/or driveline
Problem
power
Make sure the power switch is turned off.
Place the generator in a warm place for several
hours. Then connect the power cord and turn
on the generator. Slowly increase the pressure
setting to see if the engine starts
The motor or controller is damaged
Check that the wires or insulation are not
damaged. Replace the electric cord if it is
damaged or contact your advisor.
Contact your service technician.
Paint and/or water is frozen or hardened
in the pump
The extension cord is damaged
Cause
Replace the extension cord
The power switch is on and the
sprayer is plugged in, but the
motor and pump are not running
Solution
Turn the pressure control knob clockwise to
increase the pressure setting
The electric cable of the generator is
damaged
Cause
• Try a different outlet or plug in another device
you know works to test the outlet
If the paint is cured in the sprayer, the pump
seals, valves, driveline, or pressure regulator
may need to be replaced. Contact an advisor.
The pressure is set to zero
• Reset the circuit breaker or replace the fuse
Problem
Machine Translated by Google
