Using a good quality spray tip that is appropriate for your painting project is critical to getting good spraying
results. The spray nozzle controls the amount of paint applied. When choosing a nozzle, decide the size of
the orifice based on three factors:
2. Painted surface
This choice will allow you to cover large areas faster. How to understand nozzle numbering?
19 is the nozzle orifice diameter in thousandths of
an inch, or 0.019”.
Tighten the lock nut. Turn the nozzle
with the arrow in the direction of the paint outlet.
Selecting Nozzle Orifice Size
Nozzles with different orifice sizes are available to spray different fluids. The unit includes a 0.48 mm (0.019")
and 0.53 mm (0.021") nozzle for use with some acrylic and latex paints, among others. For narrow or smaller
surfaces (cabinet, fence, railings) nozzles with a narrower spray angle are recommended for greater accuracy
and control. For large areas (ceilings/walls) a nozzle starting with the number 5** or 6** will be the best choice.
Select an sprayer based on the types of coatings you will be spraying and make sure the largest tip (orifice
size) you intend to use is within the maximum tip size range the sprayer can handle.
4. Install the tip and guard on the gun.
Multiplied by 5, the result is the width of the paint
strip at a distance of about 30 cm from the wall.
5*5=25cm
3. Ability of the operator of the device
1. Used paint
3. The nozzle must be inserted into the guard
until it fits snugly against the nozzle stem.
WABRO sc ul. Arki Boÿek 2A, 41-910 Bytom
NIP: PL6263032331 | Regon: 381911373
Wabrotech.pl
9. NOZZLE SELECTION
519
SEAL
COVER
13
NOZZLE
Machine Translated by Google
