background image

English

Owner’s Manual

Read this manual for complete instructions

Table of Contents

Safety Information ................................................... 2

What’s in the Box .................................................... 3

Before you Begin ..................................................... 4

 

Selecting the proper spray tip............................. 4

 

Important preparation tips .................................. 4

Setup ......................................................................5-6

 

Material container setup ..................................... 5

 

Remote suction set setup ................................... 6

Flow Control Knob / Practice Spraying ................. 7

 

Material thinning ................................................. 7

Usage ........................................................................ 8

 

Priming with remote suction set ......................... 8

 

Spraying (Overspray) ......................................... 8

Spray Technique...................................................... 9

Cleanup - Latex Materials ................................10-11

 

Cleaning the material container........................ 10

 

Cleaning the remote suction set ....................... 11

Cleanup - Oil-based Materials .............................. 12

 

Cleaning the material container........................ 12

 

Cleaning the remote suction set ....................... 13

Cleaning the Components .................................... 14

Reassembly............................................................ 14

Maintenance ........................................................... 15

Replacement parts ................................................ 15

Troubleshooting .................................................... 16

 

Product registration .......................................... 16

Parts List ...........................................................50-51

Warranty ................................................................. 52

0109

 • Form No. 0525800B

1-800-328-8251

Wagner Technical Service

1770 Fernbrook Lane, Plymouth, MN  55447

http://www.wagnerspraytech.com

Register your product online at:

Need Help?  Call us first for answers fast.

Call Wagner Spray Tech toll-free if you have any 

comments or problems with this product.

 

Technical service hours:  Monday through Friday, 8:00 am to 7:00 pm Central Time

Summary of Contents for Optimus




















Reviews: