OptiFlow™ SideWings
Installation
5.4 Installation
Variants
The SideWings are basically mounted on the trailer by vertical pillars.
Essentially there are two different mounting options:
If your delivery includes Half Horizontal Beams and Pillars, proceed to
chapter 5.4.2 “I-Beam Installation”, page 20..
If your installation includes only Pillars, proceed to chapter “5.4.1 Top
Installation”, page 16.
5.4.1 Top
Installation
In this section you will fi nd a description of the pillar parts and an overview of
In this section you will fi nd a description of the pillar parts and an overview of
different pillar types.
different pillar types.
The pillars connect the SideWings to the trailer frame and guarantee they
The pillars connect the SideWings to the trailer frame and guarantee they
can be opened and closed to provide access to the trailer chassis.
can be opened and closed to provide access to the trailer chassis.
Connecting with:
Trailer Top (support plate required)
1
2
3
4
A
B
C
D
5
E
#
Pillar parts
#
Pillar types
1
Slider Thread Plate
A
EndSkirt Pillar (only for EndSkirt)
2
Adjustable Support
B
Hinged Pillar (only on request)
Summary of Contents for OPTIFLOW SIDEWINGS
