manualshive.com logo in svg

WABCO OPTIFLOW SIDEWINGS, Installation Manual

Share
Download
WABCO OPTIFLOW SIDEWINGS Installation Manual Download Page 10

10

OptiFlow™ SideWings

SideWings

4 SideWings

The OptiFlow SideWings system consists of three kinds of Skirts that are 
mounted on both sides of the trailer:

 

Flow Conductors

 

 MidSkirts

 

EndSkirts

Flow Conductor

The Flow Conductor attached to the front part of the trailer makes the 

The Flow Conductor attached to the front part of the trailer makes the 
OptiFlow SideWings system unique. The wing-shaped profi le ensures that 

OptiFlow SideWings system unique. The wing-shaped profi le ensures that 
the inwards bending airfl ow behind the truck is caught and converted into a 

the inwards bending airfl ow behind the truck is caught and converted into a 
force in the driving direction of the vehicle.

force in the driving direction of the vehicle.

Flow Conductor Hinged 

 

Flow Conductor Rotational

Open to top, left/right version available 

Open to side, left/right version available  

                 

Flow Conductor

 

MidSkirt 1

Right Side

In this fi gure you can see an example of a trailer equipped with the “Long” 
confi guration OptiFlow SideWings.

Summary of Contents for OPTIFLOW SIDEWINGS
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands