DMXCreator
Manual
Doc. V2.3 VXCO Lighting Systems © 1998 - 2016
73
DMXCrea:
The
DMXCrea
has the following additional features not available with
DMXCreator512MK2:
-
Saving of shows to SD- MMC card (up to 10 shows, maximum card memory is 4GB).
-
Playback of up t 4 sequences simultaneously (quadruple Multisequence)
-
PS-2 keyboard- and Midi-connector for show access and remote control
-
Integrated microphone for music triggering
-
Button interface for connection of up to any 16 momentary switches to select Sequences in Show (i.e
regular lightswitches, depending on aesthetic requirements)
Autonome Mode with PC-Keyboard Connected to Interface:
The
DMXCreator 1024+
has a connector for the attachment of a regular PC- Keyboard with the PS-2
standard. The keyboard enables sequence- and tempo-selection, Blackout, Favourite and Play/Stop
functions in autonome mode. Four sequences can be played simultaneously:
Multiple Sequence layer selection :
First Sequence: choice of sequence by pressing it’s corresponding key on your keyboard.
Second simultaneous Sequence: hold down the LEFT shift-key and press the key corresponding sequence
key.
Third simultaneous Sequence: hold down the RIGHT shift-key and press the corresponding sequence key.
Fourth simultaneous Sequence: hold down the LEFT ctrl-key and press the corresponding sequence key.
Keyboard Layout
-
Sequence Choice:
1-0, A-Z, period, comma and / (instead of / , – possible)
-
Physical Master Off:
F3
-
Favorite Scene:
F10
-
Black Out:
F11
-
Play/Stop:
F12
-
Stop within Sequence:
Escape
-
Play within Sequence:
Enter
-
Tempo Tap for first running sequence:
Tab
-
Tempo Tap for second running sequence: Shift & Tab
-
Tempo +/- first running sequence: - und = (oder ‚ und ^ )
-
Tempo +/- for second running sequence:
Shift & - and = (or ‚ and ^ )
-
Manual Trigger for sequences
programmed in manual mode:
Taste ~
-
Alt & 1 to 0:
Choice of shows 1-10 on SD card
-
Stop second running sequence :
Shift & Backspace
