DMXCreator
Manual
Doc. V2.3 VXCO Lighting Systems © 1998 - 2016
75
Saving a Show on SD Card or Harddrive
- Program Sequences in DMXCreator software
- Position Sequences in the Sequence list according to the desired order
- Open the Stand Alone window (see above)
- Press “Test Update Firmware”button in order to update interface to the latest firmware version (only
necessary to do this once)
- Choose input options (see below)
- Press “Calculate” show: the software calculates the amount of Scenes and the required memory on the
SD-card.
- To save show on the computer, (for archive or expedient copying of Showfile to SD-card), press “Save to
Disk”. Copying the Show File via Windows Explorer is recommenet, if the file is larger than 4 megabytes.
Insert the SD-card to a card reader on the computer, and copy it diretly from the Harddrive to the card. The
Showfile usually is saved to in the following directory:
C: \Program Files\DMXCreatorV6.XX\Standalone
The file extension of Stand Alone Show Files is: xxx.d1s
- To save the Show directly to the SD-card, press “Save to Card”
- When the copying process is completed, you can check the Stand Alone Show in beforehand by pressing
“Go Stand Alone”
Show Files on Card
Calculation of
Show Size
Start Calculation
