DMXCreator
Manual
Doc. V2.3 VXCO Lighting Systems © 1998 - 2016
15
7 DMX-S
ETUP
To create a new Show from beginning, the connected DMX fixtures must first be defined and addressed.
-
Start the DMXCreator software
-
Choose [New Show]
-
The following window will appear:
-
The window is divided into three parts:
1. The DMX address field. Here you will find a visual representation of up to 4096 channels (8
universes). If your interface has 512 channels, use the first 512 channels in the field only.
2. The fixtures-pool. This is a list of all currently installed fixture panels. This set of panels can be
arbitrarily modified by copying the desired panel files (with .dsp file extension) into the
corresponding directory, or by erasing them.
Directory: c:\program files\dmxcreator V6.XX\devices
The new fixture panels will be available for addressing after restarting the DMXCreator software.
Any number of fixture panels is available on the product CD-ROM, or on our website at
http://www.dmxcreator.com
1
2
3
generate printable DMX
setup report text file
(optional)
Call the Panel Designer
see chapter „the Panel Designer“
assigned
fixtures (names
are editable)
Clear current patch
Arrange icons on Plan
Exit setup
Shows setting of dip
switches for selected
address
DMX addresses
513 – 4096
below
