DMXCreator
Manual
Doc. V2.3 VXCO Lighting Systems © 1998 - 2016
58
The functions may be assigned to the DMX-in channels by moving the function from the right column to the
left side (to the corresponding DMX in channel.
„Clear all assignments“ will clear all entries in the left side of the table.
9.5.2.4 [Autonom/Stand Alone Mode]: See Chapter 10.0 Stand Alone Mode
9.5.2.5 [TCP-IP]:
It is possible to remote control the DMXCreator software from a different computer in the network using a
small additional application (DMXClient.exe). It is thus possible to access one or more DMXCreator
systems remotely from anywhere in the world.
The following adjustments can be made in the window below:
DMX-in Channels
Enable /
disable Server
Enable /
disable log
Enable at start
of
DMXCreator
Log window
