DMXCreator
Manual
Doc. V2.3 VXCO Lighting Systems © 1998 - 2016
57
If the “Master” selected, the following special functions enabled for the interface:
-
Reading of DMX input (if present)
-
Access to Stand Alone Mode functions (if present)
Record function “Trough“
If “Trough“ is enabled (only if the DMX-input is globally enabled), the dmx data from the DMX input will be
sent directly to the 3D Visual Emulator. Using this function, it’s possible to visualize the DMX data from an
external DMX controller into the 3D Visual Emulator of the DMXCreator. Please note that the DMX address
patches on both the sending controller and the DMXCreator have to be identical in order to get the correct
view.
Hint: If “Trough“ is enabled, the DMX output of the DMXCreator is disabled. This function is only possible
with interfaces that have DMX input (DMXCreator512MK2, 1024, 1024+)
Remote Control
Using this feature gives the possibility to control software functions from an external DMX source (i.e. DMX-
Desk or other controller). The external source has to be connected to the DMX-Input of the DMX hardware
interface. The following control functions are available:
-
“Physical Master“ 1-16
-
Blackout, value >128 = Blackout
-
Start / Stop, value 0 to 127 = Stop, value 128 to 255 = Start
-
Select 32 Sequences or Cues (the first 32 into the Sequence or Cue list), value >128 = Select
-
Switching on/off of the 16 Multi Sequence players, value 0 to 127 = off, value 128 to 255 = on
connected interface
interface version
output channels
connection errors
use interface
DMX-Out
universes used
with this
interface
use as
master
interface
Send DMX data over
Artnet (compatible
interface required)
Search for connected
DMX interfaces
