8
E
C
DECLARATION OF CONFORMITY
MANUFACTURER:
PROFIX
Sp. z o.o. ul.
Marywilska
34
03-228 Wars
z
aw
a Poland
Person who was authorized to develop technical documentation:
,
Trade and Distribution Centre PROFIX, 3, Dobra St., Łomna Las,
05-152 Czosnów
This is to confirm that the following products:
OSCILLATING HANDHELD GRINDER
,
by
;
PROFIX code
:
type:
230 V; 50 Hz; 180 W; cl. II; n : 12000 rpm; 90x187; S1524
o
meet essential requirement included into the following Directives of the European Parliament and the
Council:
2006/42/EC of 17 May 2006 on machinery, and amending Directive 95/16/EC (Official Journal of the EU L 157 of 9 June
2006, p. 24, as amended);
200
4
/
108
/EC
of 15 December 2004 on the approximation of the laws of the Member States relating to electro-
magnetic compatibility and repealing Directive 89/336/EEC
(Official Journal of the EU L 390 of 31 December 2004, p.
24
-37
as amended)
;
2011/65/EU of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic
equipment
(Official Journal of the EU L
of
and have been manufactured in accordance with the standards:
EN 60745-1:2009+A11:2010 EN 60745-2-4:2009+A11:2011
EN 55014-1:2006+A1:2009 EN 55014-2:1997+A1:2001+A2:2008 EN 61000-3-2:2006+A1:2009+A2:2009
EN 61000-3-3:2013
Mariusz Rotuski
VULCAN Concept
VZO180
S1B-GW-90X187;
174 01.07.2011, p . 88);
Mariusz Rotuski
Certification and Quality Manager
This declaration of conformity is issued under the sole responsibility of the m
a n ufacturer.
Ł
omna Las
,
07.07.2015
L
.
dz
.
:
DT-C2/d_zg/0153/01/07.2015
This
instruction
manual
is
protected by copyright.
Copying it
without the written consent of PROFIX Co. Ltd. is prohibited.
