7
Repeat several subsequent grinding operations using abrasive paper
- check condition of carbon brushes and replace them if necessary.
with lower granulation size each time.
NOTE:
Only abrasive sheets of sound working condition guarantee
- if the defect persists, the tool fails to work despite of voltage presence
satisfying performance of machining and protect the tool from possible
and carbon brushes are in good condition, hand the tool over for repair
failures.
to an authorized workshop to the address specified
in the warranty
card.
MANUFACTURER:
PROFIX
Sp. z o.o
.
ul.
Marywilska
34
,
03-228 Wars
z
aw
a
,
POLAND.
This appliance is in conformity with national and European standards as
well as with general safety guidelines.
Any repairs are allowed to be carried out exclusively by qualified
staff with use of original spare parts.
PICTOGRAMS:
Explanation of the icons located on the nominal plate and the i
nformation tags
:
n
WARNING:
Unplug the device from the electric network
before any maintenance or repair operations.
cloth
After using the tool it is recommended to clean the ventilation openings
P
ROTECTION OF THE ENVIRONMENT:
with compressed air to avoid damage to the bearings and remove dust
The symbol nearby denotes that old equipment must
blocking the air used for cooling the motor.
never be thrown away together with other waste (with the
penalty of a fine).
Hazardous components of electronic
n
Transport
equipment may adversely affect the natural environment and
human health.
Each household may contribute to the recovery and reuse (recycling) of
old machinery and equipment. Both in Poland and Europe a system for
recovery of used equipment either exists or is being created. The system
obliges all organizations that sell such equipment to collect the used
- check whether the power cord (
6
) is correctly plugged in and the
machinery and appliances. Moreover, general purpose collecting points
electric power outlet is energized;
for such equipment are available.
NOTE!
Carbon brushes can be replaced only by competent electricians.
CAUTION:
Grin
ding operations must be always carried out with use of
personal protection equipment for the upper respiratory tract (dust masks).
ź
Extreme caution must be taken while
grin
ding painted surfaces.
Some paints or varnishes contain hazardous substances, thus the
collected dust must be disposed in the environment-safe manner.
ź
When
grind
ing operations are carried out on surfaces coated with
paints containing lead components it is mandatory to use dust masks
capable to adsorb lead vapours. Children or pregnant women are not
NOTE!
allowed to stay at such workplaces. No eating or drinking is allowed
during such operations.
ź
The machine must never be applied to
gri
nd magnesium-coated
surfaces.
STORAGE AND MAINTENANCE:
Generally, this power tool does not require any special maintenance.
Store the machine in a place away from children, keep it clean and
protect from humidity and dust. Storage conditions should exclude any
mechanical damage and weathering.
Cleaning
In order to provide safe and efficient operation, case and ventilation gaps
of the grinder should always be free of dust and fouling, if only possible. It
is recommended to clean the tool immediately after each use.
Wipe off the grinder with a soft, damp
with a small amount of soap.
Do not use any cleaning agents or solvents; they can damage plastic
parts of the grinder.
Take care to not let water inside the device.
NOTE:
Transport and store the device in a package protecting from humidity
and dust. Secure the vents. Small elements penetrating the casing might
damage the motor.
TROUBLESHOOTING GUIDE (TYPICAL PROBLEMS):
The tool does not work:
«
»
Always wear appropriate eye protection
«
»
Use appropriate hearing protection
«Read this instruction before switching on the
power supply and starting the work»
«
»
Always wear the anti-dust mask
The policy of the PROFIX company consists in permanent improvements of the offered products and therefore the company
reserves the right to make amendments to the product specification without a prior notice. The images included into the
operation manual are only of the exemplary nature and may slightly differ from actual appearance of the device
purchased.
