5
e)
Power tools require maintenance. Check power tools for
concentricity or jamming of moving parts, any cracks and all
other factors affecting the power tool work safety. If any
damage to the power tool is detected, it should be repaired
before use.
Improper power tool maintenance is a reason for many
accidents.
f)
Cutting tools should be sharp and clean.
Keeping sharp cutting
edges in good condition reduces the risk of jamming and facilitates
operation.
g)
Power tools, equipment, working tools etc. should be used
according to this user's manual taking into account
operating conditions and the work to be done.
Misusing a
power tool can result in dangerous situations.
h)
At low temperatures and after a long brakes in operation it is
recommended to turn the power tool to operate it with no
load for a few minutes to provide proper grease distribution
inside its driving mechanism.
i)
Use soft, damp (cannot be wet) cloth and soap to clean power
tools. Do not use petrol, solvents and other agents that may
damage your equipment
.
j)
Power tools can be stored/carried after making sure that all
moving components are locked and protected against
release with original devices intended for this purpose.
k)
Store power tools in a dry, dust and water-protected place.
l)
Carry your power tool in its original packaging to provide
protection against mechanical damage.
WARNING! General warnings regarding the use of
power tools.
Repair
:
a)
Power tools can be repaired by competent persons only who
use original spare parts.
It will provide safe operation for the power
tool.
catch fire or explode.
d)
e)
f)
Use of hearing protectors is mandatory (headsets,
earplugs).
Long-term exposure to intense noise may lead to deafness.
g)
Operators must wear protecting gloves and never touch the
grinder shoe when the machine is in motion.
It presents hazard
of hand injuries.
WARNING!
While operating power tools it is necessary to observe basic
work safety rules to avoid fire, electric shock or mechanical
injury.
OSCILLATING HANDHELD GRINDER
a)
The oscillating handheld grinder, referred to as 'the grinder'
is not a waterproof device, therefore it can be used
exclusively for dry grinding.
Penetration of water into the electric
tool interior may lead to electrocution.
The grinder is designed for dry grinding of wooden, wood-containing,
b)
Grinding of metals entails emission of sparks. One should
metal or plastic surfaces as well as removing old paint coatings with use
make sure that the sparks splattered during grinding
of abrasive paper with necessary grade and granulation (from 40 to 400).
present no hazard to anybody and that all inflammable
CAUTION! Do never use the grinder for asbestos and graphite-
(combustible) materials are removed from the vicinity.
containing materials. Do not apply for gypsum (joints of
Sparking may also lead to self-ignition of grinding dust. The hazard is
cardboard and gypsum panels) or similar materials.
Fine dust
even more serious when the dust is mixed with remnants of paints,
penetrates into the machine interior and clogs ventilation paths, which
polyurethane or other chemicals and grinded material is hot after
leads to overheating of the motor and its eventual burning. Such defects
prolonged machining. It is why operators must avoid excessive heating
present the reason to make the guarantee rights null and void.
of treated material or the grinder as well as always remove dust during
breaks and after completion of grinding jobs.
c)
Workplace must be always kept clean and tidy.
Mixtures of
various materials are particularly hazardous. Dust of light metals may
The tool is designed only for household (DIY) application. Do
Aspiration of grinding dust is harmful to health. Direct
physical contact with dusts or their penetration to lungs can
cause allergic reactions and/or respiratory system diseases
of the operator or persons in the vicinity. Some materials,
e.g. paint coatings with lead content, contain potentially
toxic chemical substances. In order to reduce the impact of
these substances, the workplace must be always well
ventilated, and tested and safe protective measures must
be used, such as safety dust filter masks with a P2 class
absorber designed especially for filtering microscopic
particles.
Dust extraction should be used, if only possible.
Safety goggles must always be used in order to prevent dust
from getting into eyes.
h)
While working with the electric tool operators must always
hold it with two hands and keep safe position of the entire
body.
Operation of an electric tool with two hands is always safer.
i)
Protect the object machined.
It is safer to fix the object machined
in a fixing device or a vice than holding it in your hand.
j)
Hold power tool by insulated gripping surfaces, when
performing an operation where the grinding accessory may
contact hidden wiring or its own cord.
Grinding accessory
contacting a 'live' wire may make exposed metal parts of the power
tool 'live' and could give the operator an electric shock.
k)
After unexpected interruption of power voltage, e.g. after a
voltage shutoff or unplugging the power cord, it is
mandatory to unlock the On/Off trigger and release it to the
Off position.
It is the measure that prevents from unintentional
activation of the electric tool.
l)
Do not use a power tool with its power cord damaged. Do not
touch the power cord when damaged; in case of damaging
the power cord during operation unplug it from the mains.
Damaged power cords increase the risk of electric shock.
Additional safety tips useful for grinding
:
ATTENTION!
If a permanently fixed power cord becomes damaged, it must
be replaced with a special cable or assembly available at the
manufacturer's or at a specialized repair service point.
DESIGN AND APPLICATION AREA OF THE GRINDER
:
The tool is a device of the second class of electric protection (double
insulation) and is driven with a single-phase motor
.
