Fig. 23
4.
Install replacement bearing.
5.
Install KETTLE ASSEMBLY.
SHAFT SEAL
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
All Models
1.
To access shaft seal between kettle and control
box housing, remove KETTLE ASSEMBLY.
2.
Remove shaft seal from control box housing.
Fig. 24
3.
Clean mounting surface on control box housing
then install replacement shaft seal.
4.
Install KETTLE ASSEMBLY.
K20ETT Only
1.
Support kettle using 2x4 blocks of wood.
2.
Remove kettle support cover.
Fig. 25
3.
Remove kettle support and bearing housing
assembly from support shaft.
Fig. 26
4.
Remove shaft seal from kettle support.
Electric Countertop Tilting Kettles, K6ETT, K12ETT, K20ETT - REMOVAL AND REPLACEMENT OF PARTS
Page 13 of 28
F35496 Rev. A (1117)
