REMOVAL AND REPLACEMENT OF PARTS
COVERS AND PANELS
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
Control Box Cover
Fig. 2
Bottom Cover
Fig. 3
ELECTRICAL PANEL
COMPONENTS-WATER LEVEL
CONTROL, TRANSFORMER,
CONTACTORS AND
TEMPERATURE CONTROL
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
1.
2.
Disconnect lead wires from component being
replaced.
3.
Remove screws securing the component to
panel.
4.
Reverse procedure to install and check for proper
operation.
Electric Countertop Tilting Kettles, K6ETT, K12ETT, K20ETT - REMOVAL AND REPLACEMENT OF PARTS
F35496 Rev. A (1117)
Page 6 of 28
