Chapter 3: Convenient Functions
3.4
Running Cutting Tests
This parameter tests the speed and force of the blade and creasing tools.
Also test the fit of the cutting line and the creasing line.
!
caution
Test Speed and Force
Test fit
Make sure that the air pump switch is turned on .
1
After setting the origin, press the "Test cut" button, the machine will work automatically,
Tool1 will work a Square, Tool2 will work a Prismatic.
Test cut
Speed and Force
Work of tool 1
Work of tool 2
2
1
If blade holder are placed in the tool holder 1 and creasing tool are plased in the tool holder 2.
You can adjust the blade speed and force.Turn on the speed and pressure buttons and adjust.
* Click the tool 1 icon to adjust the speed and force of the tool 1.
* Click the tool 2 icon to adjust the speed and force of the tool 2.
* How to adjust the value?
1: Drag the white button to adjust.
2: Click on the value, an input will appear, or you can enter the value manually.
If the result of the test is a cut line and a creasing line,then the nodes cannot overlap, it is proved that the
“Calibrate cutter size” parameter needs to be modified.Please refer to “3.8” for details.
Page 23
