Chapter 3: Convenient Functions
3.1
Loading the Media
Supplement
• This plotter is available with a vacuum suction writing panel.
• There are media that cannot be held down by vacuum suction. Please test before use.
• When loading a media that cannot be securely attached using the vacuum duction, reinforce adhesion by
using tape on all four sides.
• If the media floats, secure the four corners using a drafting tape. When the media is floating, if the plunger tip
(cutter blade or ballpoint pen) has contact with it, it can affect the finish quality. Or, the cutting plotter body
might be damaged. Please fix the warping of the media, or do not use the warped media.
2
Place the media on the writing panel.
3
Turn on the vacuum pump's power supply.
Turn on the switch of air pump.
320X450
(1) Blank media (no mark)
(2) Print media (with mark)
*The first mark is not the same as the other three.
Before work, place move the carriage (tool 1)on the first mark.
Page 20
