30
Configure your router
Advanced
Port mapping
The device provides multiple interface groups and supports up to five interface
groups including one default group. Traffic coming from one interface of a
group can only be flowed to the interfaces in the same interface group. Thus,
the device can isolate traffic from group to group for some applications. By
default, all the interfaces (LAN and WAN) belong to the default group, and the
other four groups are all empty. It is possible to assign any interface to any
group but only one group.
Port mapping configuration:
Click the
Port Mapping
sub-menu in the left pane. The
Port Mapping
Configuration
page is opened automatically, where you can configure the
mapping group.
To manipulate a mapping group:
Select a group from the table, then you can see the available interface
(LAN and WAN) and grouped interface list.
Select interfaces from the available and grouped interface list and add it
to the interface group using the
Add>
button or delete it using the
<Del
button, in order to manipulate the required mapping of the ports.
Click
Apply Changes
to finish the configuration.
•
•
1.
2.
3.
