20
Configure your router
Advanced
RIP configuration:
Click
RIP
in the left pane. Routing Information Protocol (RIP) is an internet
protocol you can setup to share routing table information with other routing
devices. In this page, you can configure the RIP settings such as enabling or
disabling the RIP function.
RIP
: Enable or disable the RIP function of the router.
Interface
: The interface on which you want to enable RIP.
Recv Version
: Indicates the RIP version in which information must be
passed to the device it can be accepted into its routing table.
Send Version
: Indicates the RIP version this interface will use when it
sends its route information to the other device.
The
RIP Config List
shows the current RIP setting of the device.
•
•
•
•
•
•
