15
The
Setup
menu allows you to configure the functions of the router. Choose
this menu
and you can see the next sub-menus:
WAN
and
LAN
.
WAN
WAN configuration:
Click the
Setup
menu. The
WAN Configuration
page under the
WAN
sub-menu in the left pane is opened automatically. You can configure the
parameters for the WAN interface of your router, such as channel mode, PPP
settings and WAN IP settings.
Auto Bridge
: Enable or disable the Auto Bridge Mode. If it is enabled,
the child VNT814 router’s DCHP mode will change to
DCHP Relay
automatically. See
DCHP mode
on page 17 for more details.
Channel mode
: It can be
Bridge
,
IPoE
or
PPPoE
.
Enable NAPT
: Enable or disable the NATP function.
Enable IGMP
: Enable or disable the IGMP function.
User Name
: User name of the PPP connection
Password
: Password of the PPP connection.
Type
(PPP settings):
Continuous
,
Manual
or
Connect On Demand
.
Idle Time (min)
: The idle time of the PPP connection when the type is
Connect On Demand.
Type
(WAN IP settings):
Fixed
or
DHCP
.
Local IP address
: The IP address of the router.
Remote IP address
: The gateway’s IP address of the router.
Netmask
: The subnet mask of the router.
Default Route
: The mode of the default route of the router.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Configure your router
Setup
