25
Getting started
System setup
Prime line
Use this feature, also known as automatic line selection, to choose which line is
automatically selected each time you make an outside call. If you select
Auto
,
the deskset picks up any plugged telephone line starting from Line 1.
To set the prime line:
1. When the telephone is idle, press
MENU
/SELECT
.
2. Press or to scroll to
System Setup
, then press
MENU/
SELECT
or
/SKIP
.
3. Press or to scroll to
Prime Line
, then press
MENU/
SELECT
or
/SKIP
.
4. Press or to choose the desired line, then press
MENU/
SELECT
or
/SKIP
. To exit without making
changes, press
CANCEL
.
NOTE:
If you install less than four telephone line cords to the
UP416 console and select
Auto
as your
Prime line
setting, make
sure you plug in your telephone line cords starting from L1/2 jack.
Avoid having any unoccupied telephone jack between other
occupied telephone jacks.
One Touch
Phone Settings
>System Setup
Registration
System Setup
Set Ext No.
>Prime Line
Network Setup
Prime Line
Line 3
Line 4
>Auto