15
Getting started
Deskset installation (set static IP)
8. The deskset displays
Console’s name
. The console’s name is set as
Console
by default. If you have changed your console’s name, enter the
same name using dialing keys on the deskset. Otherwise, skip to step 9 to
continue.
•
Press
DELETE
to delete a character.
•
Press
/REPEAT
or
/SKIP
to move the cursor left or right.
•
Press
0
to add a space.
When you finish editing, press
MENU
/SELECT
to save.
9. The deskset screen displays
Please set an extension number to this
phone
. Press
MENU
/SELECT
to continue.
10. Press
/REPEAT
or
/SKIP
to choose the desired extension number. The
extension number ranges from
11
to
26
. Press
MENU
/SELECT
to continue.
11. The deskset screen displays
Connecting to Console...
It takes up to 60
seconds to complete the connection. The screen displays
Connected
to Console
(
Console
represents the name of the console) when the
connection is successful.
•
If the deskset displays
Please check: 1. Console’s name and network
info 2. Ethernet
, make sure you enter your console’s name correctly
and the Ethernet switch or router is installed properly. Repeat steps 3-5
above to connect to console again.
12. The deskset displays
Starting...
It takes a while for the system to finish the
startup and the deskset enters idle screen when the startup is done.
13. Lift the handset. If you hear a dial tone, the installation was successful.
NOTE:
Make sure the static IP you entered is not occupied by other network devices. You can
check the occupied IP addresses occupied in your router menu.