12
After the deskset is powered up, it takes at least one minute for the deskset
to start up the system and the screen displays
booting....
during startup.
The deskset is set to obtain IP address automatically by default. The screen
displays
Obtaining IP from DHCP server Please wait...
when the deskset
is obtaining IP from the Ethernet switch or router. When an IP is obtained, the
screen displays
IP obtained: XXX.XXX.X.XXX Press SELECT to proceed
.
If the deskset cannot obtain the IP address automatically, it displays
No IP
assigned. Check network.
and then the
Network setup
menu. You may need
to enter the IP address manually under the
Set static IP
menu. See
To set
static IP when initially setting up the deskset
section (page 14) for details.
To connect the deskset to the UP416 console:
1. When the deskset displays
IP obtained: XXX.
XXX.X.XXX Press SELECT to proceed
, press
MENU
/SELECT
.
2. The deskset displays
Enter the name of the
Console connecting to this phone.
Press
MENU
/SELECT
.
3. The deskset displays
Console’s name
. The console’s
name is set as
Console
by default. If you have
changed your console’s name, enter the same name
using dialing keys on the deskset. Otherwise, skip to
step 4 to continue.
•
Press
DELETE
to delete a character.
•
Press
/REPEAT
or
/SKIP
to move the cursor left
or right.
•
Press
0
to add a space.
When you finish editing, press
MENU
/SELECT
to save.
4. The deskset screen displays
Please set an
extension number to this phone
. Press
MENU
/SELECT
to continue.
5. Press
/REPEAT
or
/SKIP
to choose the desired
extension number. The extension number ranges from
11
to
26
. Press
MENU
/SELECT
to continue.
(Continued on next page)
IP obtained:
XXX.XXX.X.XXX
Press SELECT
to proceed
Enter the name
of the Console
connecting to
this phone
Please set an
extension number
to this phone.
Set Ext No.
12
Console’s name
Console_
Getting started
Deskset installation (auto set IP)