background image

www.vtechphones.com

53

a

ppendix

FCC, aCTa and IC regulations

If ths equpment s causng harm to the telephone network, the telephone company may temporarly dscontnue your telephone servce. The telephone company s 

required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct 

the problem and the telephone company is required to inform you of your right to file a complaint with the FCC. Your telephone company may make changes in its 

facltes, equpment, operaton, or procedures that could affect the proper functonng of ths product. The telephone company s requred to notfy you f such changes 

are planned.
If ths product s equpped wth a corded or cordless handset, t s hearng ad compatble.

If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or 

test emergency numbers, please:

Remain on the line and briefly explain the reason for the call before hanging up.

Perform such actvtes n off-peak hours, such as early mornng or late evenng.

Industry Canada

Ths equpment comples wth regulatons RSS-213 and CS-03 of Industry Canada. Operaton s subject to the followng two condtons: (1) ths devce may not cause 

nterference, and (2) ths devce must accept any nterference, ncludng nterference that may cause undesred operaton of the devce.

The term ‘’IC: ‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met.

The Rnger Equvalence Number (REN) for ths termnal equpment s 0.1. The REN s an ndcaton of the maxmum number of devces allowed to be connected to 

a telephone nterface. The termnaton on an nterface may consst of any combnaton of devces subject only to the requrement that the sum of the RENs of all the 

devices does not exceed five.

Ths Class B dgtal apparatus comples wth Canadan ICES-003. 

Summary of Contents for 6032































































Reviews: