VTech 6032 User Manual Download Page 40

Page: 40 / 62

www.vtechphones.com

ppendix

Battery

after the battery is fully charged for 16 hours, you can expect the following performance:

Operaton

Operatng tme

Whle n use (talkng)

10 hours

Whle not n use (standby*)

100 hours

*Handset s off the telephone base but not n use.

The battery needs chargng when:
• A new battery s nstalled n the handset.
• Battery ndcator on screen s empty.

CaUTIoN:

1. Use only the suppled battery (part number 89-1326-00-00) or equvalent. To order a replacement, vst our webste at

www.vtechphones.com or call 1 (800) 595-9511. In Canada go to vst www.vtechcanada.com or dal 1 (800) 267-7377.

2. Do not dispose of the battery in a fire. Check with local waste management codes for special disposal instructions.

3. Do not open or mutlate the battery(es). Released electrolyte s corrosve and may cause burns or njury to the eyes or

skn. The electrolyte may be toxc f swallowed.

4. Exercse care n handlng batteres n order not to create a short crcut by lettng them come nto contact wth conductve

materals such as rngs, bracelets, and keys. The battery and/or conductor may overheat and cause burns.

5. Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and

limitations specified in this manual.

warNINg:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO WATER OR ANY TYPE OF MOISTURE.

Summary of Contents for 6032































































Search results

Summary of Contents for 6032

Reviews:

Related manuals for 6032

Brands by name

Popular brands

VTech 6032, User Manual

Search results

Summary of Contents for 6032

Reviews:

Related manuals for 6032

Brands by name

Popular brands