22
4.2 Bus setup
The submenu of bus setup is as follows:
Figure 4
‑
15 Bus setup menu
4.2.1 Detector/module setup
The setup interface of detector/module is a key and relatively complex one of the system.
All detectors/modules controlled by the system can be set up in this interface.
The setup interfaces of detector/module are as shown in the following figure:
Figure 4
‑
16 Detector/module setup
The following section describes the line-by-line sheet setup of detector/module. As setup of
the system imitates the spreadsheet of Windows operation interface, most of the operations are
completed by the mouse, which operates drop-down box, horizontal scroll bar and vertical scroll
bar. The spreadsheet allows the setup of detector/module to be simple, unified, intuitive and
easy to understand.
Operating methods of the spreadsheet are exactly the same and similar to those of the
microcomputer; therefore this manual will not describe each setup one by one in detail.
The figure below shows production type setup of detector/module:
Figure 4-17 Production type setup
