33
Figure 4-40 Floor integration - point output
The figure shown above is the floor integration of point output type and certain floor in the
system can be selected by drop-down box, which means
The alarm of detector or module of
any specified type at the floor will cause the modules listed in the result list to act.
.
4.3.4 Room integration setup
Figure 4
‑
41 Room integration setup interface
For room integration, start room number and end room number at a certain floor can be
selected by drop-down box, which means:
When detector or module of any specified type at
all rooms with a number between start number and end number at the floor gives an
alarm, all modules listed in the output result list will be activated.
4.3.5 Complex linkage setup
Figure 4
‑
42 Complex linkage setup interface
The complex linkage setup differs greatly with the above linkage relations and the specific
addresses of 1-5 detectors or modules can be set in the condition column. The semanteme of
complex linkage:
start all modules listed at the result list when all the set detectors or
