66
4.6.3 Default settings
Use the
Default Settings
option to reset all configurable parameters to their factory default settings.
When the
Default Settings
option is chosen from the
System Setup
menu, a message is displayed asking
you to confirm. Press the
OK
button to confirm, or the
Cancel
button to cancel the operation.
4.6.4 Configuration file
User can backup or restore system configuration values to or from a file. Use Up and Down arrow buttons
to select either
Backup
or
Restore
Configuration.
4.6.5 Revise
firmware
Use the
Revise Firmware
option to upgrade the firmware in the VP-404/4048. The firmware can be
revised through an external read-write CD drive, a USB flash drive, or a USB thumb drive. Connect the
device to the VP-404/4048 and then use this option.
4.7 System
Shutdown
Use the
System Shutdown
option to shut down or reboot the system. To shut down or reboot the system:
1. Use
the
Up
and
Down
arrow buttons to select either Shutdown or Reboot.
2.
Press the OK button to confirm.
3. Press
the
OK
button to confirm the operation again, or press the Cancel button to cancel the
operation.
