46
The Add Network Disk menu is displayed, enabling you to set the IP address and volume size of the disk,
test its validity, and save the disk parameters.
To enter an IP address:
1. Use
the
Up
and
Down
arrow buttons on the remote control to highlight the
IP/Addr
option and
press the
Right
arrow button to confirm the choice.
2.
Enter an IP address using the number buttons on the remote control.
Note: You cannot enter a period (dot) between the fields in the IP address using the remote control
keypad. Use the on-screen keypad to enter the dots.
3. Press
the
OK
button to confirm the new address.
To enter a volume name for the new disk:
1. Use
the
Up
and
Down
arrow buttons on the remote control to highlight the
Volume
option and press
the
Right
arrow button to confirm the choice.
2.
Use the on-screen keyboard to enter a volume label for the new disk.
To test a network disk:
1. Use
the
Up
and
Down
arrow buttons on the remote control to highlight the Test! option.
2. Press
the
OK
button to confirm the choice.
The test result will appear on the screen.
To save disk parameters:
1. Use
the
Up
and
Down
arrow buttons on the remote control to highlight the
Save!
option.
2. Press
the
OK
button to confirm the choice.
4.3.5 TV
output
The VP-404/4048 can be connected to a VGA monitor or a TV to view the camera video signal. Use the
TV Output
menu to set the following parameters for the video output port:
Device -
sets the output to VGA or TV.
Standard -
sets the signal format for the output device. Select from NTSC, PAL, SECAM, and so on.
Output to -
sets the video output to the composite or S-Video signal.
Delay -
sets the delay between consecutive camera signals when displaying all the camera signals
automatically.
Camera (From) -
specifies the first camera signal displayed in the automatic cyclic camera mode.
Camera (To) -
specifies the last camera signal displayed in the automatic cyclic camera mode.
Screen Split -
sets the number (1, 4, 9, or 16) of cameras to be shown on the local screen.
Time Stamp -
Enables and specifies the position of the time stamp on the screen.
Time Format -
Specifies the format of the time stamp.
