45
To set the timeout value for PTZ cameras connected to the VP-404/4048:
1. Use
the
Up
and
Down
arrow buttons to highlight the
Timeout
field.
2. Use
the
Right
arrow key to increase the value and the
Left
arrow key to decrease the value.
3. Press
the
OK
button to confirm the new value.
You can set and recall up to 6 preset configurations for each camera using the following buttons in the
PTZ control section:
Preset -
save the current pan, tilt, zoom, and focus settings in one of 6 preset configurations.
Recall -
recall the selected preset configuration.
ZOOM -
adjust the zoom to provide a more closer or wider view of the subject.
FOCUS -
adjust the focus of the camera.
Speed -
Adjust the speed of the selected PTZ camera.
Pan and tilt -
Adjust the pan and tilt of the selected camera.
4.3.3 Video input
This function is to map physical camera video inputs on VP-404/4048 cards to the video positions
on local display. Normally, video input#1 is map to position #1. But you actually can set video
inputs to any position from #1 - #16, (depends on how many VP-404/4048 cards you install) on the
screen as long as there is vacancy.
4.3.4 Disks
Use the
Disks
menu to add and remove network disks from the system. Network disks can be used to
provide more storage space for long time recording .
To add a network disk:
1.
Highlight the disk you want to add and press the
OK
button.
2. When
the
Add Disk
screen is displayed, press the
OK
button.
