SMTP Settings
Server address
: specify the IP address or hostname of the networked SMTP server.
Server port
: specify the SMTP Port Number is the port number used by the networked SMTP
server. By default the port number is 25.
Source e-mail address
: specify the e-mail address that will be used by the device.
Destination e-mail address
: specify the e-mail address where the device will send the alert
messages.
E-mail notification interval
: specify interval in seconds at which the e-mail notification will be
sent from the device [0-86400]. If 0 specified, then device will send an e-mail notification
immediately after unexpected system behavior.
SNMP Settings
SNMP is the standard protocol that is widely used for remote network management over the
Internet. With the SNMP service enabled, the device will act as SNMP agent.
Enable SNMP
: specify the SNMP service status.
Friendly name
: displays name of the 570n that will be used to identify the unit. This name has
the same value as Friendly name in the Device settings.
