with a specific VLAN ID value, only management frames that matching configured VLAN ID will
be accepted by device.
Restrict management to interfaces
: select interfaces that will be restricted with management
VLAN.
Router Mode
This section allows customizing parameters of the Router to suit the needs of network, including
ability to use the built-in DHCP server. When device is configured to operate as Router, the
following sections should be specified: WAN network settings, LAN network settings and LAN
DHCP settings.
Enable NAT
: select to enable NAT (Network Address Translation), that functions by
transforming the private IP address of packets originating from hosts on your network so that
they appear to be coming from a single public IP address and by restoring the destination public
IP address to the appropriate private IP address for packets entering the private network, the
multiple PCs on your network would then appear as a single client to the WAN interface.
WAN Settings
WAN network settings include settings related to the WAN interface. The access type of the
WAN interface can be configured as: Static IP, Dynamic IP, PPPoE client.
WAN mode
:
choose Static IP to specify IP settings for device WAN interface:
