Both sides (iPoll Access Point and iPoll Station) of the link must have the same security
settings.
The 570n device working, in iPoll Station wireless mode, supports authentication/encryption
methods listed below:
Open
: no encryption.
Personal WPA
: preshared key encryption with WPA using AES method.
Personal WPA 2
: preshared key encryption with WPA2 using AES method.
By default there is no encryption enabled on the device:
Personal WPA/WPA2
encryption must be specified with the pre-shared key:
Passphrase
: specify WPA or WPA2 passphrase [8-63 characters]. The passphrase will be
converted to key format, selected above.
iPoll Station Advanced Wireless Settings
Advanced wireless settings allow configuring the 570n unit to get the best performance/capacity
of the link:
Transmit power
: set the unit's transmitting power at which the device will transmit data. The
larger the distance, the higher transmit power is required. To set transmit power level use the
slider or enter the value manually. When entering the transmit power value manually, the slider
position will change according to the entered value. The maximum transmit power level is limited
