specified. Default: 25
Noise level greater than
: system will send notification when signal noise will reach value
greater than specified. Default: -60 dBm.
RX drop greater than
: system will send notification when percent of RX dropped packets
become higher than specified value. Default: 250 packets per seconds.
TX retry greater than
: system will send notification when percent of TX retries becomes
higher than specified value. Default: 250 packets per seconds.
Device reboot
: system will send notification about unexpected or administrator initiated device
reboot.
SNMP Traps Settings
Manager address
: specify the IP address or hostname of SNMP Trap receiver.
Manager port
: specify the port number of the Trap receiver. Default port number is 162.
Trap community
- specify the SNMP community string. This community string acts as password
between SNMP manager and device by default Trap community string is "public".
Use inform
: select to wait for an acknowledgment from SNMP manager that Trap was received.
Retry count
: specifies maximum number of times to resend an inform request [1-10]. Default: 5.
Retry timeout
: specifies number in seconds to wait for an acknowledgment before resending
request [1-10]. Default: 1.
