32
Operation
InSertIng the KoBold FK370 FreShener KIt
The Freshener kit consists of two cartridges and two grey roller brushes.
•
Insert the Freshener kit cartridge
with the green arrow into the side with
the green symbol on the grey cover and the other Freshener kit cartridge into
the opposite side.
•
Make sure that you can hear the cartridges engage.
•
Push the front cover down using both hands to the original position. Make
sure that you can hear the front cover engage.
worKIng In KoBoSan aCtIVe
•
Distribute Kobosan active evenly onto your carpet.
•
Switch on the device.
The suction motor will automatically remain disacti-
vated with the Freshener kit in place.
•
Move the Kobold EB370 Electronic brush with the Freshener kit back and
forth in adjacent streaks.
•
Then move the Electronic brush laterally over the surface covered with
Kobosan active.
•
Depending on the degree of contamination, work in the Kobosan active for up
to 3 minutes per square metre.
•
Then leave it dry with a window opened. Depending on the type of carpet and
the room temperature, it should take around half an hour to dry.
Before vacuuming Kobosan active:
•
Switch the device off and unplug the mains power cord from the socket.
•
Insert the grey roller brushes again as follows:
4
Fig. 3.8 Inserting the Freshener kit
