16
Getting started
2.2
Standby position and power setting
Once you have connected the Kobold VK150 Vacuum cleaner to one of the ac-
cessory parts, you can set the device into standby position or keep it in power
setting.
Caution! Risk of injury from toppling device!
The standby position is used to turn off the device after finishing cleaning.
• In standby position, place the Vacuum cleaner with the accessory part
only on horizontal surfaces.
SettIng the deVICe Into StandBy PoSItIon
In standby position, the device stands upright and firmly on the ground.
If you wish to put the device away for a quick break or if you have finished
vacuuming, set it into standby position by completing the following steps:
•
Move the telescopic handle forward
until it stands upright and you can
hear it snap into the pivot.
rollIng the deVICe
Also, you can conveniently roll the device in standby position to move it to differ-
ent places:
•
To do this, tilt the device backward
in standby position so that it stands on
the rollers.
•
Then roll it in the desired direction.
1
2
Fig. 2.2 Standby position
