manualshive.com logo in svg

Vorwerk kobold VK150, Instruction Manual

Share
Download
Vorwerk kobold VK150 Instruction Manual Download Page 19

18

Getting started

2.3 

mains connection

InSertIng the ConneCtIng CaBle

The connecting cable can best be inserted when the telescopic handle 

 is 

slightly pulled out. Before using the Kobold for the first time, insert the connect-
ing cable as follows:

• 

Lead the connecting cable through the handle 

.

• 

Pull the connecting cable through the cable channel on the telescopic handle 

 downwards.

• 

Plug the connector plug into the connection socket 

 until you can hear it 

engage.

 

After inserting the connecting cable, leave it connected to the device. Only 
remove the connecting cable when you replace it.

wIndIng uP and unwIndIng the ConneCtIng CaBle 

  Warning! Risk of electric shock!

•  Disconnect the mains power cord from the socket before you wind up 

the connecting cable.

  Caution! Danger of damaging electrical parts!

•  Make sure not to damage the device and the connecting cable while 

winding up.

Fig. 2.5  Inserting the connecting cable

1

2

3

Summary of Contents for kobold VK150



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands