34
[
▲
]
[
▲
]
ENG
LANGUAGE
•
No Frost
From “Installer menu” page, selecting “No Frost”, you can join to
“Setting No Frost Menu”. From this new page, is now possible to
choose desidered “No Frost functions” during the “No Frost”
process. For more details on setting “No Frost functions”, See:
“Setting No Frost Menu”.
•
Language
Language selection
•
Quiet
Select "Quiet" from the Installer "Use menu" to access the menu
where you can turn the Quiet function on/off. The default setting
is "No".
•
Quiet Pr.
Select “Quiet Pr.” from the Installer "Use menu" to access the
menu where you can set the time interval during which the
machine will operate at minimum speed. The default start and
end time values are 20:00 and 9:00 because the function has
been designed for night use, but the interval can be set to any
time.
[
▲
]
[
▲
]
NO
QUIET
20:00
09:00
[
▲
]
QUIET PR.
[
▲
]
ENGLISH
UN-BALAN.
HEATER
HEAT FORC
[
▲
]
[
▲
]
NO FROST
“Modbus ID” page
If more than one HMI control is installed, it is necessary to set the Modbus of each external display like described here below.
1.
Change the “MBUS ID” so that it is different than 1 and also different from the value of other HMI controls: insert for example the num-
ber 2 and press
√
.
2.
Disconnect the HRU from the power grid.
3.
Connect the additional HMI control.
4.
Reconnect the HRU to the power grid.
5.
Wait for about 30sec - 1min: the led with the symbol “
√
“ will start flashing.
6.
At the end of the process the HRU will go back to normal functioning.
7.
Repeat points from 2 to 6 for each HMI control, remember always to set a different MBUS ID for each HMI.
NOTA:
after the first start up with the second HMI control connected it is necesary to disconnect the equipment from the power grid and
then connect it back.
Summary of Contents for VORT HRI PHANTOM
Page 137: ...137 ...
