30
ENGLISH
"HOME" page
When turned on, the message "WAIT ..." appears on the screen. It then goes to the "HOME" page.
This page allows you to view various data useful for controlling equipment. The data and information that the page can
display are indicated in the figures and table below.
1
•
Normally blank display area.
2
•
“Bypass”, in case its function is active;
•
“No-Frost”, in case its function is active.
3
•
Equipment operating status display area:
“Off” + Speed: “1”, “2”, “3” e “Boost”.
•
In the event of alarm:
- with the unit lock: "Alarm!" Message alternating with "Block!";
- without the unit lock: "Alarm!" Message.
See "Alarms" in the "Operation and Use" section.
•
“Holiday”, in case its function is active.
4
•
“Ext’ Value of the outside air temperature (Example: Ext +5°C) after
pushing the button [II]. See Fig. 3, letter (A)
5
•
“Int’ Value of the indoor air temperature (Example: Ext +22°C) after
pushing the button [II]. See Fig. 3, letter (B)
•
“Progr.” if weekly programming has been activated, after pushing the
button [I]
•
The message “Prog.”flashing will appear if during weekly programming
the user manually varies the speed .
•
The word "Man" is displayed when programming is not activated.
6
•
“Exh’ Value of the exhaust air temperature (Example: Ext +18°C) after
pushing the button [II]. See Fig. 3, letter (D)
•
Date (example 03/04/2017), after pushing the button [I].
7
•
Time of day (for example 12:30), after pushing the button [I].
The figure below represents the areas of
the display:
5
7
6
4
3
1
2
Summary of Contents for VORT HRI PHANTOM
Page 137: ...137 ...
