voptech DP31, User Manual

Page: 7 / 55

7
1.
Confirm connected
Confirm whether the equipment of the power cord, network cable, electric lock control line
connection, the startup is normal. (Check the network state of light)
1) Power port
Power supply ways: 12v/DC or POE.
CN16
1 2
+12V GND
12V 1A/DC
2) Electric-lock and indoor switch port
CN6
1 2 3 4 5
S_IN S_OUT NC COM NO
Indoor switch Electric-lock switch
3)
Driving mode of electric-lock(Default in active mode)
【
Note
】
When in active mode, device can drive 12V/700mA switch output maximum, to which a standard
electric-lock or another compatible electrical appliance can be connected.

When use the active mode, it is 12V DC in output.

When use the passive mode, output is short control (normally open mode or normally close mode) .
4) Wiring instructions

NO: Normally Open Contact.

COM: Common Contact.

NC: Normally Close Contact.
Jumper in passive mode
Jumper in active mode